Menu

Architectural Metal

K15 Series

CIDAN Machinery’s K15 folding machine is extremely quick and easy to use, built in a sturdy all-welded construction with cast iron legs and side frames. The K15 is built for continuous running under the most demanding conditions. The machine is adapted for all types of folding of thinner material.

Type: Folder    Lengths: 100’ or 122’    Capacity*: 16 gauge

More Info

*Machine is rated at 100%  full duty cycle in mild steel at 122” in length

K25 Series

CIDAN Machinery’s K25 folding machine is a fast and easy to use machine made in a sturdy all-welded steel construction with cast iron side frames for stability. This machine covers a wide range of uses and is appropriate for the manufacturing industry, repair workshops, sheet-metal shops, roofing and sign manufacturers. Both the folding beam and clamping beam have twin drives.

Type: Folder    Lengths: 100’, 122’ or 159’    Capacity*: 14 gauge

More Info

*Machine is rated at 100% full duty cycle in mild steel at 122” length

TZ LONG FOLDER 

The TZ model is a sturdy and fully hydraulic swing-folding machine which can be adapted to meet the requirements with a variety of accessories. The Clamp beam and the bending flange are driven over separate camshafts in order to achieve exact parallel courses of motion.

Type: Long Folder    Lengths: 15ft to 40ft    

Capacity*: 18, 16 and 14 gauge models available

More Info

*Machine is rated in mild steel, click on more info for other material capacities.

TD DOUBLE FOLDER

The TD Double Folder harnesses the advantages of double bending for large-scale operations of sheet metal, façade construction, and general bending with an economic yet top quality system – one bending flange above and one below enable bending from top down as well as from bottom up without having to rotate or turn the material.

Type: Double Folder    Lengths: 10.6ft to 40ft    

Capacity*: 14-18 gauge

More Info

*Machine is rated in mild steel and is available in different capacities.

RAPIDO

The CIDAN Rapido shear is a heavy built mechanical shear that will cut material thicknesses from minimum to maximum without any settings at all. The shear has several features as standard with a wide range of options such as different back gauge systems and sheet handling systems.

Type: Shear    Lengths: 100’ or 122’    Capacity*: 13 gauge

More Info

*Machine is rated in mild steel, click on more info for other material capacities.

MST

The MST series are a massive all in one slitting and cut-to-length systems.

Type: Slit & Cut to Length    Lengths: 1.25 or 1.5m  

Capacity*: Refer to table

More Info

*Machine capacity is influenced by knives and length of machine, click more information for specifications

KA6

The KA series are massive all in one straightening, slitting and cut-to-length systems designed to take the coil set out of various thicknesses of material. The KA6 has 6 straightening rolls and a capacity of 3 slit of 16ga (1.5mm) or 5 slits of 20ga (1mm) mild steel. 

Type: Slit & Cut to Length    Lengths: 1.25 or 1.5m    

Capacity*: Refer to table

More Info

*Machine capacity is influenced by knives and length of machine, click more information for specifications