CIDAN EVO Sheet Metal Shear

EVO metal shear - CIDAN Machinery Americas

The CIDAN EVO shear is the strongest in our line of mechanical guillotine shears. With the blade gap adjustment, sheet support, and table rails with t-groove as standard features, this machine comes well equipped with far more than just the “must-have’s”.

The blade gap adjustment makes it possible to always achieve the best cutting result, regardless of the material’s thickness. The sheet support follows the sheet down for the entire cutting operation, assisting with safety and more consistent cuts every time. The table rails with t-groove allows for quick and accurate adjustments, making it easier to meet the customer’s need in an expeditious manner.

Even though it’s our strongest shear, the EVO shear is still suitable for handling sensitive material with the wide variety of sheet handling equipment and pneumatic sheet support options available.

Download Brochure Get a Quote

Play Video Button
Model Working Length Material Thickness Speed Weight
  ” (mm) Steel Stainless Steel Aluminium Cuts/min lbs (kg)
EVO 25 100” (2,550) 9 ga (4.00mm) 14 ga (2.25mm) 0.216” (5.50mm) 28 cuts/min 4,167 lbs (1890kg)
EVO 30 122” (3,100) 9 ga (4.00mm) 14 ga (2.25mm) 0.216” (5.50mm) 28 cut/min 4,806 lbs (2280kg)
EVO 40 161” (4,100) 14 ga (2.50mm) 18 ga (1.25mm) 0.125” (3.00mm) 28 cuts/min 5,778 lbs (2670kg)
  • Sturdy, low-noise gear motor
  • Single or continuous stroke control
  • Double edged blades
  • Finger proctection
  • Blade gap adjustments
  • Spring loaded hold down beam
  • Squaring arm with 15″ (380 mm) scale
  • Foot pedal to start the cut
  • Pneumatic Sheet support with return plate (materialto front side of shear)
  • LED cutting line light
  • Manual back gauge 0-31.5″ (0-800 mm) operatedfrom the front side
  • Motorized back gauge including CutLink Control andball screw spindles
  • Pneumatic sheet support with rolls 39.50″ (1000 mm)
  • Pneumatic sheet support with return plate (materialto front side of shear)
  • Moveable material wagon instead of fixed platewagon (extra material wagon available)
  • Pneumatic hold down beam for use with soft material
  • Adjustable angle gauge system with graduated scale
  • Safety guards for machine back side – mechanical orwith light guard (safety guard is required to fulfill CEdirectives) 29.50/31.50″ (750/800 mm) or 39.50″(1000 mm)
  • Squaring arm 25.60″ (650 mm) or 39.50″ (1000 mm),with or without tilting stops
  • Support arms in front, with or without tilting stops
  • Forced cooling for cutting motor